ZENEC Z-E3776, Руководство по эксплуатации

Страница: 27 / 88

27 Rev.A
CALL UP BLUETOOTH SETTINGS.
1. Call up Bluetooth source.
2. Tap on
in the Bluetooth control bar/toolbar to call up the Bluetooth settings.
3. Make the required settings. The changes are taken over automatically.
Setting Icon Operation
Automatic
connection
ON / OFF.
Order
< Surnames
1. Sort according to first name of contact.
2. Sort according to surname of contact.
Microphone
Internal: The microphone in the device is used.
External: The external microphone is used. Only possible if
fitted and connected.
Microphone
amplification
< >
Tap for fine setting of microphone amplification factor from 1 to 3.
Bluetooth
Address
00:15:83:22:0E
Unique ZENEC BT device address.
Phone book ON / OFF (automatically download address book).
NOTE: In isolated cases a restart of your ZENEC system will be required, e.g. if the
microphone settings have been changed.
ACCEPT AND TERMINATE CALLS
Incoming calls can be accepted in different ways depending on the configuration of the vehicle in
combination with the ZENEC system and interface / analogue LFB (Key 1 / Key 2) and the LIN bus
connection.
Accept call
Option 1: Via the ZENEC system, by tapping ”Accept”