ZENEC Z-E3776, Руководство по эксплуатации

Страница: 13 / 88

13 Rev.A
Number Description / function

Press to mute all audio sources. Press again to cancel the muting of all audio sources.

Press during an incoming call (ringing) to accept the call.

Press during an active telephone call to terminate the call.

Tap to reassign the buttons. The system deletes the current button assignments on the
steering wheel.

Tap to restore the default assignments.
A1
Alternative function: Press to switch between the individual sources.
Hold down to start the Android Auto or CarPlay voice control.
A2
Alternative function: Press to jump to the navigation and press again to call up the media
info control bar within the navigation.
Hold down to start the Android Auto or CarPlay voice control.
STEERING WHEEL REMOTE CONTROL TEACH-IN MODE 2 – MODE 2
Fiat Ducato III Series 8 and 9
2
5
1
3 A1 8 9
4
A2
7
1
6
The ZENEC system is for vehicles which are already preconfigured with the CAN IR Stalk
interface, see compatibility list www.zenec.com . If your vehicle is equipped with a resistance-based
multifunction steering wheel, you must also connect the analogue LFB adapter cable included in
the scope of delivery (Page 79 - No. 10) with the main connecting cable to Key 1 / Key 2 / GND
and the vehicle-side 20-pin connector. The connects the buttons on the back of the steering wheel
preconfigured.
The rear LFB button functions (volume, camera, skip, BT etc.) are displayed to you visually in the
system setup of the ZENEC under [Settings]
➔
[Other]
➔
[LFB Assignment (Analogue) ] under Mode
2. Analogue mode 2 is already preset for Series 8 and 9 in the factory. The BT handsfree telephone
is connected via multiple assignment, as shown graphically in Mode 2.