ZENEC Z-E3776, Руководство по эксплуатации

Страница: 14 / 88

14 Rev.A
Number Description / function

Mode changeover
buttons:
Possible settings:
Tap to change the analogue mode.
Mode 1 = Fiat Ducato III Series 7;
Mode 2 = Fiat Ducato III Series 8 and 9.

Radio source Press to jump forward a radio station.
Media source
Press to jump forward a track.
Hold down to start fast forwarding of the track.

Radio source Press to jump back a radio station.
Media source
Press to jump back a track.
Hold down to start fast rewinding of the track.

CAM/Voice
with LFB (Key1/Key2 - mini-ISO) use: Press to call up the
camera source.
Press again to switch to camera 1 / multiview, camera 2 and
camera 3.
Hold down to start the Android Auto or CarPlay voice control.

Press to increase the volume.

Press to reduce the volume.

Mute/Accept/Hang up: Press to mute all audio sources if no call is active. Press again to
cancel the muting of all audio sources.
Press during an incoming call (ringing) to accept the call.
Press during an active telephone call to terminate the call.

Tap to reassign the buttons. The system deletes the current button assignments on the
steering wheel.

Tap to restore the default assignments.
A1 Alternative function: Press to switch between the individual sources.
A2
Alternative function: Press to jump to the navigation and press again to call up the media
info control bar within the navigation.
New assignment or teach-in of the rear buttons
1. Call up device settings.
2. Tap on [Various] to open the settings.
3. Display second page of the Various settings .
4. Tap on [LFB Assignment (Analogue)] to call up steering wheel operation teach-in mode 2 (Mode 2).
5. Tap [Change] to reassign the buttons. The system deletes the current button assignments on
the steering wheel. The reassignment can then be started. It is advisable to assign the deleted
buttons from top to bottom on the left-hand side, then repeat the procedure on the right-hand side.