CoolSculpting® Elite
System User Manual
CS-UM-CM3-02-EN-D
46
Cleaning and Maintenance
Perform routine cleaning and maintenance according to your site’s protocols.
Cleaning
The use of an unapproved cleaning solution or method on the control unit or applicator may
result in damage. Always use approved products and follow the guidelines below.
Approved Products
The following products are approved for cleaning the control unit and applicators:
•
Isopropyl alcohol
•
Mild detergent and warm water
•
PDI Sani Cloth Plus wipes or CaviWipes1™
Cleaning Guidelines
•
Unplug the control unit before cleaning.
•
Use cleaning wipes or spray the cleaning agent on a soft wipe, paper towel, or equivalent
material.
•
After cleaning the system components, dry them with a soft cloth to remove any cleaning residues.
Do not spill any fluid directly on any part of the control unit, or applicators.
Do not submerge the applicator or any other part of the system in any liquid.
Do not use excessive amounts of fluid.
Do not apply cleaning solution to the electrical connections.
Do not sterilize the control unit, applicator, or any other system components.
Cleaning the Touchscreen
For best performance, clean the touchscreen regularly.
Approved cleaning products include:
•
Isopropyl alcohol
•
Window cleaning fluid
