CoolSculpting® Elite
System User Manual
Treatment
CS-UM-CM3-02-EN-D
31
Example
: Treatment for Applicator B
b. Go to “Prepare the applicator” and repeat the procedure for Applicator B.
Example
: Starting Dual treatment for Applicators A and B
c. If the treatment times for both the applicators is same, tap
A
for starting Applicator A first or
B
for starting Applicator B first. There is a 5-minute window between end of treatment for
Applicators A and B to allow 2-minute massage of the treatment areas. There is delay timer for
start of treatment on the second side for Dual treatment.
If the treatment times are different by 5 or more minutes, both the applicators are started at the
same time. The massage will be performed on the treatment area that finishes first.
d. When ready to start treatment, tap
START
9. End the treatment
Materials required:
•
Towel or other absorbent material
•
Wet or damp towel/gauze or water-based wipes
