System Overview
CoolSculpting® Elite
System User Manual
18
CS-UM-CM3-02-EN-D
Applicators
The applicator delivers controlled cooling and heating to the treatment site.
The applicator consists of the applicator connector, the applicator umbilical, and the applicator head.
The applicator is used with supplies provided by ZELTIQ.
The handpiece of the applicators can be disconnected from the umbilical, except for the C80 and S150,
which are used with standalone umbilical.
Always use gelpads with the applicator as instructed in this document.
The applicators are designed to treat most body areas. There are 7 applicators supplied with the
system (Table 6). Clinicians should consider all physical aspects of the area to be treated and use the
applicator that will fit best for each patient.
ZELTIQ defines a specific combination of treatment temperature and duration for each profile.
Typically, a colder treatment temperature is paired with a shorter treatment duration.
Table 6: Applicators supplied with
CoolSculpting® Elite
System.
Applicator
Total
Cooling
Area
(cm
2
)
Recommended
Treatment
Sites
Profile
Temp.
Range
Profile
Duration
Range
Pre-
Treatment
Skin Care
Post-
Treatment
Care
Option
CoolSculpting Curve 80
(C80™)
35
Small areas
with pinchable
fat, such as
the submental
and
submandibular
areas
Down
to
-15°C
Up to
60
minutes
Skin wipe Manual
massage
CoolSculpting Curve 120
(C120™)
84
Areas with
pinchable fat,
such as the
flanks,
abdomen,
banana roll,
back fat, and
bra fat
Down
to
-15°C
Up to
60
minutes
Skin wipe Manual
massage
CoolSculpting Curve 150
(C150™)
133
Areas with
pinchable fat,
such as the
flanks and
abdomen
Down
to
-15°C
Up to
60
minutes
Skin wipe Manual
massage
