System Symbols
CoolSculpting® Elite
System User Manual
64
CS-UM-CM3-02-EN-D
SYMBOL
STANDARD
REFERENCE STANDARD TITLE
SYMBOL
TITLE
EXPLANATORY TEXT
EN 50419
Marking of Electrical and
Electronic Equipment in
accordance with Article
11(2) of Directive
2002/96/EC (WEEE).
Recycle:
Electronic
Equipment
Do Not throw this unit into a municipal
trash bin when this unit has reached the
end of its lifetime. T ensure utmost
protection of the global environment and
minimize pollution, please recycle this
unit.
IEC 60417,
Reference 5032
Graphical Symbols for Use
on Equipment.
Alternating
Current
To indicate on the rating plate that the
equipment is suitable for alternating
current only; to identify relevant
terminals.
IEC 60417,
Reference 5019
Graphical Symbols for Use
on Equipment.
Protective
Earth
Ground
To identify any terminal which is
intended for connection to an external
conductor for protection against electric
shock in case of fault, or the terminal of
a protective earth (ground)
electrode. The location of this symbol
shall be directly adjacent to the AC inlet
or as close as is feasible.
IEC 60601-1,
Appendix D
Medical Device Marking
and Labeling
Safe
Working
Load
Safe Working Load
ISO 7000,
Reference 0623
Graphical Symbols for
use on equipment.
This Way
Up
Indicates correct upright position of the
transport package.
ISO 7000;
Reference 2402
Graphical Symbols for
use on equipment –
registered symbols.
Do Not
Stack
To indicate that the items shall not be
vertically stacked, either because of the
nature of the transport packaging or
because of the nature of the items
themselves.
ISO 7000,
Reference 1135
Graphical Symbols for
use on equipment –
registered symbols.
Recycle
Indicates an item can be recycled.
ISO 15223-1,
Clause 5.1.2
Medical Devices-Symbols
to be used with medical
device labels, labeling
and information to be
supplied
Authorized
Represent
ative
Indicates the authorized representative
in the European community.
IEC 60417
Reg. No. 5021
Graphical symbols for use
on equipment
Equipotent
ial contact
To identify the terminals which, when
connected together, bring the various
parts of an equipment or of a system to
the same potential, not necessarily
being the earth (ground) potential, e.g.
for local bonding.
IEC 60417
Reg. No. 5569
Graphical symbols for use
on equipment
Locked
position
To identify the location of a lock. To
identify the control that effects a locking
function. To indicate that the component
or function is in its locked state.
IEC 60417
Reg. No. 5570
Graphical symbols for use
on equipment
Unlocked
position
To identify the control that effects an
unlocking function. To indicate that the
component or function is in its unlocked
state.
