CoolSculpting® Elite
System User Manual
Treatment
CS-UM-CM3-02-EN-D
23
Treatment
A treatment is composed of timed segments of cooling and heating. Each treatment is based on a
profile, which is contained on the card.
Profiles, Treatments, and Cards
The profile defines the temperature and duration of a treatment. Table 8 lists the elements that
comprise a treatment profile.
A cycle is an individual instance of a treatment; that is, the application of one profile to one patient.
Each card contains a set number of treatments and a list of profiles. When all the treatments have been
used, the card is expired.
Note:
When a Dual card is used for two applicator placements per treatment, 1 unit of treatment is
deducted. When a Solo card is used for one applicator placement per treatment, 1 unit of
treatment is deducted.
Table 8: Elements of a Treatment Profile
Element
Units
Description
Temperature
°C
The treatment temperature
Time
minutes
The duration of the treatment
Treatment Procedure
1. Set up the control unit
a. Position the control unit next to the bed or chair that will be used for the treatment.
Note:
Ensure that the vents have enough clearance for adequate ventilation and that the operator
can access the power switch easily.
The Control Unit contains coolant and should not be operated/transported on its back
as the coolant may escape.
b. Insert one end of the power cord into the power receptacle on the back of the control unit.
c. Plug the other end of the power cord into a grounded outlet.
To minimize the risk of electric shock, connect this equipment to a grounded electrical
outlet.
d. Engage the lock on each of the four casters.
