manualshive.com logo in svg

Zellweger MINIGAS MK5, Руководство по эксплуатации

Поделиться
Скачать
Zellweger MINIGAS MK5 Скачать руководство пользователя страница 12

MAN0585.P65

Issue 01 - 11/99

2987M5023

12

1.  GENERAL DESCRIPTION

1.2

BRIEF DESCRIPTION

The Minigas Mk5 is a rugged, self-contained instrument with a
die-cast zinc metal case for use in mining and surface industries.
It has the option of either a dry-cell or a rechargeable battery
pack, which it is permissible to change in a hazardous area if
necessary.

Concentrations of gases in the air are measured using Zellweger
Analytics sensors. Audible and visual alarms alert the user to
the danger when hazardous or dangerous conditions are
detected.

Central to the operation of the Minigas Mk5 is a microprocessor
which provides a multiple-display digital readout of real-time
concentrations of the four gases and their associated peak
readings. The Minigas Mk5 also produces short term (STEL)
and long term (LTEL) indications of toxic gas exposures, an
optional STEL reading for explosive gas exposure, and an
‘elapsed time since switch on’ display.

Data logging facility is available as standard. This enables up
to approximately 40 hours of exposure data to be stored either
as a fixed log where logging stops when the log store is full, or
as a rotating log where logging continues after the store is full
by overwriting the oldest data. Data can then be downloaded
for analysis by means of a special Neotronics transfer unit, an
IBM-compatible personal computer and dedicated software.

1.3

ACCESSORIES PROVIDED WITH THE
MINIGAS MK5

The complete Minigas Mk5 instrument comprises a multi-gas
monitor fitted with a plug-in battery pack, either rechargeable
(NiMH) or dry-cell.

Содержание MINIGAS MK5





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды