Zeiss Argon Ion Beam System, Инструкция по эксплуатации

Страница: 14 / 32

NQ=çÑ=PO fåëíêìÅíáçå=j~åì~ä=^êÖçå=fçå=_É~ã=póëíÉã=ÉåMOKÑã
RK=léÉê~íáçå
dÉííáåÖ=ëí~êíÉÇ
5. Operation
It is assumed that the operator is already familiar with general functions of SmartSEM
®
and the
operation of the workstation.
IMPORTANT
Note the instruction manual of your workstation.
For general information about SmartSEM
®
refer to Software Manual SmartSEM
®
and
Software Manual SmartSEM
®
NV.
5.1. Getting started
5.1.1. Switching on the argon beam
1 Select Tools/Goto Panel...
2 Select Argon Gun from the menu.
The Argon Gun panel opens.
3 Click on Standby .
IMPORTANT
When the Argon Ion Beam System powers on, it automatically tests if the gun can achieve
a discharge current greater than 50 mA. This can take up to one minute.