Zaxcom Fusion User’s Manual______________________________________________________Chapter 2
127
Fusion Service Menu page
Page purpose:
This page allows new software to be installed and allows the owner/operator to make changes to
Fusion‟s functionality.
How to get here:
(
MENU
key
Type
036
Setup
button
Service
button
)
(
Status
button
Type
036
Setup
button
Service
button
)
Figure 2-75 Fusion Service Menu page and with Debug Screen page Overlay
Page Notes
None
Page Level Shortcuts
None
Software Options button
This allows the purchasable options to be enabled in the field, instead of having to send the Unit into Zaxcom.
Processor Speed button
Normal
– Runs the processor at 245.76 MHz.
High
– Runs the processor at 294.912 MHz.
This allows the owner/operator to change the operating speed of the processor. (These processor speeds are
based on the software and hardware configuration used to create this User Manual. YMMV!)
NOTE: High
– Increases the mirroring process performance by 20%.
Load ProgFile button
See the
Upgrading the Firmware in Each Unit
section {
p.160
}.
Load From CD-R button
See the
Upgrading the Firmware in Each Unit
section {
p.160
}.
Burn Program ROM
See the
Upgrading the Firmware in Each Unit
section {
p.160
}.