Chapter 2
______________________________________________________
Zaxcom Fusion User’s Manual
112
End Seg button
Allows you to select the last segment to mirror. In most cases, the End Seg can be left at
999
.
End Seg field Shortcuts
See:
Common Data Entry Field Shortcuts List
{
p.146
}
Mirror Mode button
Enables/disables the 'Mirroring' process, which writes the audio to the selected mirror device. Once it is turned
On, it immediately starts the mirror process.
Off
– Disables the mirror process.
On-NORMAL
– Enables the mirror process, but only while not recording.
On-CONTIN.
– (continuous) Enables the mirror process. If adequate resources are available, it will continue
while recording the audio.
IMPORTANT:
You must set the mirroring parameters before you turn
On
mirroring.
Do not
change folders
while mirroring is turned
On
. Doing so can cause the mirroring process to skip files or cause the Fusion to
stop responding.
IMPORTANT:
You must turn
Off
mirroring to change any of the parameters. When the mirror process is
active, all other buttons are disabled until the mirroring process has completed.
Advanced Options button
Pressing it takes you to the
Advanced Mirror Options page
{
p.117
}.
Mirror Drive Status button
This button functions in two ways:
It displays the current status of the Mirror Drive and the Mirror process.
When pressed, you are returned to the
My Fusion page
{
p.104
}.
