ZScan Manual
40
Any facet removed using the Recycle function or the Remove Isolated Patches slider will
be put in the Recycle Bin.
In the case of facets deleted with the Recycle Facets function, enter the Facets Edition
mode and right-click on the corresponding mode in the Scan Tree. The Restore function
will become available.
If the facets were deleted with the Remove Isolated Patches slider, it will not be possible
to restore them from the Recycle bin. Instead, you must go back to the Surface
Parameters Expanding Panel in the Surface mode and change the slider to a more
conservative value. The deleted facets will then be restored in the STL, depending on the
new value of the slider.
Facets permanently deleted with the Delete facets function will not appear in the
Recycle bin and it is impossible to restore them.