ZScan User Guide
37
Distanc
e is OK.
Scanner
is too
far.
Note: Your scanner model might differ from the illustration, but the mechanism remains
the same
When the scanner is too close to or too far from the surface, it
loses tracking. This means that the cameras can no longer position
the targets or that the target distribution is incorrect.
If tracking is lost, reposition the scanner in front of a surface
already scanned and trigger again or try to redistribute the
targets differently on the surface.
When a temporary malfunction occurs,it is indicated by 2 red LEDs
located on the upper part of the ZScanner 800.
Editing the Scan
ZScan offers some editing functions in order to clean the 3D model before publishing a
final result. The available functionalities are described below.
Deleting facets
During digitization, it is possible that undesired surfaces be acquired. Sometimes, a shiny
surface or a specular reflection can produce noise in the scan. Before publishing a final
