10-5
IM 703155-01E
Saving and Loading Data
10
7.
Turn the
rotary knob
to select the save destination directory.
By default, the save destination directory is set to the internal hard disk. To
save the data to the root directory of the internal hard disk, check that the
Selection box in the Save File dialog box shows “/”, do not carry out this step
(the operation of selecting the destination directory), and proceed to step 9.
To distinguish directory names from file names, a slash (/) is attached to the end of
directory names.
8.
Press
SELECT
twice quickly. The Selection box in the Save File dialog box
shows “/directory name”. The file list display area shows the data in the
selected directory.
9.
Press
SELECT
. The cursor moves to the entry box.
10.
Enter the file name using
numeric keys & ENTER
.
•
If the auto naming function was turned ON in step 5, you cannot enter the file name.
•
To cancel the directory selection or the entered file name, press
RESET
. When
cancelled, the cursor moves to the file list display area.
11.
Press
SELECT
. The data is saved to the specified file.
Indicates the directory of the file shown. The display here does
not change even if you change the directory to be shown.
To move to a higher level directory, select here and
then press the SELECT key twice quickly.
If you select compact/ (or usbmem/) and press the SELECT key twice
quickly, the data on the CF card (or USB memory) is displayed.
File list display area
Selection display
Displays the selected directory name.
In the case of the top directory of the
internal hard disk, a slash (/) is
displayed. In the case of the CF card,
/compact is displayed. In the case of
the USB memory, /usbmem is
displayed.
Entry box
Displays the directory or file name
selected using the rotary knob. You
can also enter the file name.
List of files and directories in the directory
10.2 Saving/Loading Setup Data
