YOKOGAWA UP750, Руководство пользователя

Страница: 23 / 130

<Toc> <2. Initial Settings>
2-1
IM 05E01B02-41E
2. Initial Settings
This chapter describes examples of setting PV input types, control output types.
Carrying out settings described herein allows you to perform basic control. Refer to
examples of various settings to understand how to set parameters required. Refer to
“6.1 Parameter Map” for an easy to understand explanation of setting various
parameters. If you cannot remember how to carry out an operation during setting,
press the
DISP
key no more than four times. This brings you to the display (operating
display) that appears at power-on.
Power-on
Set setup
parameters.
See “2.2 Setting PV Input Type (Setting First at Power-on),”
or “2.3 Changing PV Input Type.”
Set the control
output.
(Factory-set to “Time Proportional Relay Output.”)
(Factory-set to “Unspecified.”)
Initialize
parameters.
Set program
patterns.
Denotes a step that must always be followed.
Denotes a step that should be followed as necessary.
Setup Procedure
Set operating
parameters.
Controller operation
See “2.4 Setting Control Output Type.”
See “2.5 Initializing Parameters.”
Set PV input.
Be sure to follow this
step whenever a change of setting
is made to the PV input type.
See “3.
Programming.”
1st Edition : May 31,2000-00