YOKOGAWA UP750, Руководство пользователя

Страница: 126 / 130

7-6
<Toc> <7. Function Block Diagram and Descriptions>
IM 05E01B02-41E 1st Edition : May 31,2000-00
■
Control Output
Control output (OUTPUT1) selects the output type among the current output, voltage pulse
output, and relay contact output signals.
Preset output value is output when the operation is stopped by key operation or contact
input, which takes priority over the manual operation.
Each function can be set by the following parameters.
Setup Parameters
Function Parameter
Control output type selection OT1
Control output cycle time CT1
Cooling-side control output cycle time CTc1
UPMD
UPMD
UPMD
OUT
OUT
OUT
Analog output-1 type AO1 UPMD OUT
Analog output-2 type (cooling-side) AO2 UPMD OUT
Main menu Submenu
Operating Parameters
Function Parameter
Preset output n.PO LP1 n.PID
Output limiter
n.Oc
LP1 n.PID
Main menu Submenu
Cooling-side preset output
n.OL, n.OH
LP1 n.PID
■
Contact Output
PV event 1 is outputted via DO1 (contact output 1).
PV event 2 is outputted via DO2 (contact output 2).
Instrument alarm 1 is outputted via DO3 (contact output 3).
Time event 1 is outputted via DO4 (contact output 4).
Time event 2 is outputted via DO5 (contact output 5).
Time event 3 is outputted via DO6 (contact output 6).
Time event 4 is outputted via DO7 (contact output 7).