YOKOGAWA UP750, Руководство пользователя

Страница: 31 / 130

<Toc> <2. Initial Settings>
2-9
IM 05E01B02-41E 1st Edition : May 31,2000-00
8.
Press the
SET/ENT
key once to display the
parameter “IN1” (PV input type).
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP
MENU:UPMD/IN #1
input 1 type select
IN1 = typeK3
9.
Press the or key to display the
required setpoint. The figure below shows
an example of setting the PV input type to a
Pt100 resistance temperature detector
(-200.0
⬚
C to 500.0
⬚
C).
SET/ENT
PT.No RUN RESET
DISP MODE
MENU:UPMD/IN #1
changing!
input 1 type select
IN1 = Pt2
Blinks during
change.
10.
Press the
SET/ENT
key once to require the
setpoint.
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP
MENU:UPMD/IN #1
input 1 type select
IN1 = Pt2
11.
Press the SET/ENT key once to display the
parameter “UNI1”.
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP
MENU:UPMD/IN #2
input 1 unit select
UNI1 =
°
C
12.
Press the
SET/ENT
key once to display the
parameter “RH1” (maximum value of PV
input range).
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP
MENU:UPMD/IN #3
input 1 range high
RH1 = 500.0
13.
Press the or key to display the
required setpoint. The figure below shows
an example of setting the maximum value
of the PV input range to 200.0
⬚
C.
SET/ENT
PT.No RUN RESET
DISP MODE
MENU:UPMD/IN #3
changing!
input 1 range high
RH1 = 200.0
Blinks during
change.
14.
Press the
SET/ENT
key once to register the
setpoint.
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP
MENU:UPMD/IN #3
input 1 range high
RH1 = 200.0
15.
Press the SET/ENT key once to display the
parameter “RL1” (minimum value of PV
input range).
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP
MENU:UPMD/IN #4
input 1 range low
RL1 = -200.0