YOKOGAWA UP750, Руководство пользователя

Страница: 27 / 130

<Toc> <2. Initial Settings>
2-5
IM 05E01B02-41E
8.
Press the
SET/ENT
key once to register the
setpoint.
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP
MENU:UPMD/IN #3
input 1 range high
RH1 = 200.0
9.
Press the SET/ENT key once to display the
parameter “RL1” (minimum value of PV
input range).
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP
MENU:UPMD/IN #4
input 1 range low
RL1 = -200.0
1st Edition : May 31,2000-00
10.
Press the or key to display the
required setpoint.
The figure below shows an example of
setting the minimum value of
the PV input range to 0.0
⬚
C.
SET/ENT
PT.No RUN RESET
DISP MODE
MENU:UPMD/IN #4
changing!
input 1 range low
RL1 = 0.0
Blinks during
change.
11.
Press the
SET/ENT
key once to register the
setpoint.
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP
MENU:UPMD/IN #4
input 1 range low
RL1 = 0.0
If the type of input is voltage, also config-
ure the PV Input Decimal Point Position
(SDP1), Maximum Value of PV Input Scale
(SH1) and Minimum Value of PV Input Scale
(SL1) parameters that follow this step.
12.
Press the
SET/ENT
key for more than 3 seconds. This returns you to the display shown at power-on
(figure below).
PV
SET/ENT
PT.No RUN RESET
DISP MODE
PVE2
PVE1
PV2
TME
AL
1
1
2
3
4
MAN2
PRG
RST
HLD
LOC
MAN1
CAS
PTNO: 0
TM=------- SEGNO: 0/ 0
RCY: 0/ 0
SP: 0.0
°
C
RST lamp
ON.