YOKOGAWA UP750, Руководство пользователя

Страница: 104 / 130

6-12
<Toc> <6. Parameters>
IM 05E01B02-41E 1st Edition : May 31,2000-00
■
Setup Parameters
●
Program Setpoint-related Parameters
Located in: Main menu =
PARA
; Submenu =
SP
Name of Parameter Setting Range and Description Initial Value
SP tracking selection
Program time unit
Segment setting
method
OFF (0), ON (1)
Tracking is performed when the mode changes from program to
Local (The local setpoint keeps track of the program setpoint.) OFF (0)
Sets the time unit of a program.
hh:mm (0): “hour, minute”
mm:ss (1): “minute, second” hh:mm (0)
Defines the method of programming. Note that changing the
setpoint of this parameter deletes the program in question.
0: Programming by setting segment times
1: Programming by setting segment ramps 0
Program pattern
number clearance The controller resets (clears) the program pattern number on
the operating display to “0” at the end of program operation.
OFF (0): Not cleared.
ON (1): Cleared. OFF (0)
Program setpoint-1
limiter upper limit
Program setpoint-1
limiter lower limit
Program setpoint-2
limiter upper limit
Program setpoint-2
limiter lower limit
100.0% of PV
input range
0.0% of PV
input range
100.0% of PV
input range
0.0% of PV
input range
Place limits on the program setpoints when the controller is in
program operation.
0.0% to 100.0% of PV input range.
Note that SPL1 < SPH1
Place limits on the program setpoints when the controller is in
program pattern-2 retransmission.
0.0% to 100.0% of PV input range.
Note that SPL2 < SPH2
User
Setting
Target Item
in CD-ROM
Ref.5.2(3)
Ref.5.1(1)
Ref.2.2(2)
Parameter
Symbol
SPT
TMU
SEG.T
PNC
SPH1
SPL1
SPH2
SPL2
Program pattern-2
retransmission The controller can serve as a program pattern generator.
Thus, another program pattern can be created in addition to the
control-purpose program pattern. Note that the segment time
setpoints of the created program pattern are the same as those
of the control-purpose program pattern.
OFF (0): Not used.
ON (1): Used. OFF (0)
PT2.G