YOKOGAWA TA320 Скачать руководство пользователя страница 95

Страница: 95 / 144

9-9

IM 704210-01E

Saving and Loading the Data from a Floppy Disk

Explanation

Saving the measurement results

• Selecting the data type

Select the desired data type from the following.

• BIN: The measurement results are saved in binary format. Once they are saved, they can be

loaded to the instrument.

• TEXT:

• Hardware histogram mode: Values (representative values) in the histogram window and their

frequency are saved in text format. They cannot be loaded to the instrument after they are

saved.

• Time stamp mode: All the data (time stamps and measured values) of a measurement block

are saved in text format. They cannot be loaded to the instrument after they are saved.

• File name extension and directory

File name extension and directory vary depending on the data type. An appropriate extension is

attached to the file name before the file is saved in its corresponding directory.

• BIN: “.WVF” is attached to the file name, and the file is saved in the directory TA_WAVE.

The header file (ASCII format) is also saved at the same time. The header file contains the

information to be used for analysis of the saved data. The extension for the header file is

“.HDR”.

• TEXT: “.CSV” is attached to the file name, and the file is saved in the directory TA_TEXT.

• Data size

The data size varies depending on the number of samples (S) and data type. (Unit: bytes)

• BIN:

• Measured data obtained in hardware histogram mode: Approx. 133 K bytes (approx. 384 K

bytes for simultaneous positive/negative measurement of pulse width measurement)

• Measured data obtained in time stamp mode: Approx. 8 bytes

S + approx. 8 K bytes

• TEXT: The data size varies considerably depending on the selected sampling mode, sample

size and histogram display etc. However, the maximum data size is approx. 1 M bytes.

Saving the statistical computation results

• File name extension and directory

“.CSV” is attached to the file name, and the file is saved in the directory TA_MISC.

• Data size

Each computation data requires approx. 500 bytes.

Checking the free space available on a floppy disk

Refer to 9.2.

Entering the file name

Refer to 9.3.

Note

• Loading and saving are not possible during measurement (i.e. while the START indicator is ON).

• Loading of measurement results (text format) and statistical computation results to this instrument is not

possible.

• If measurement results are loaded, the set-up information accompanying the loaded measurement results

will be used as the set-up information.

• If the extension of a file name is changed using a personal computer etc., it will be impossible to load that

file.

CAUTION

Never remove the floppy disk while the access indicator is blinking. Failure to do so

may damage the magnetic head of the floppy disk drive or destroy the data saved on the

floppy disk.

9.4 Saving and Loading the Measured and Computed Data

Содержание TA320

















































































































































Результаты поиска

Содержание TA320

Отзывы:

Похожие инструкции для TA320

Бренды по названию

Популярные бренды

YOKOGAWA TA320, Руководство пользователя

Результаты поиска

Содержание TA320

Отзывы:

Похожие инструкции для TA320

Бренды по названию

Популярные бренды