YOKOGAWA TA320 Скачать руководство пользователя страница 2

Страница: 2 / 144

IM 704210-01E

Foreword

Thank you for purchasing the YOKOGAWA TA320 Time Interval Analyzer.

This user’s manual contains useful information about the functions and operating methods of the

instrument. It also contains precautions that should be observed during use. To ensure correct use

of the instrument, please read this manual thoroughly before operating it.

Keep the manual in a safe place for quick reference whenever a question arises.

The following manual is provided with this instrument in addition to this manual.

Manual Name

Manual No.

Description

TA320 GP-IB Interface

IM704210-12E

Describes the communication functions for the GP-IB

User’s Manual

interface.

Notices

• The contents of this manual are subject to change without prior notice as a result of

improvements in the instrument’s performance and functions. Display contents illustrated in

this manual may differ slightly from what actually appears on your screen.

• Every effort has been made in the preparation of this manual to ensure the accuracy of its

contents. However, should you have any questions or find any errors, please contact your

nearest YOKOGAWA representative as listed on the back cover of this manual.

• Copying or reproduction of all or any part of the contents of this manual without

YOKOGAWA’s permission is strictly prohibited.

Trademarks

• MS-DOS is a registered trademark of Microsoft Corporation.

• HP-GL is a registered trademark of Hewlett-Packard Company.

Revisions

• 1st Edition : December 1996

Disk No. HF07

1st Edition: December 1996 (YG)

Содержание TA320

















































































































































Результаты поиска

Содержание TA320

Отзывы:

Бренды по названию

Популярные бренды

YOKOGAWA TA320, Руководство пользователя

Результаты поиска

Содержание TA320

Отзывы:

Бренды по названию

Популярные бренды