manualshive.com logo in svg

YOKOGAWA TA320, Руководство пользователя

Поделиться
Скачать
YOKOGAWA TA320 Скачать руководство пользователя страница 137

12-6

IM 704210-01E

Item

Specifications

Time variation display (time stamp mode only)

• Scale: X-axis and Y-axis of time variation

• X MIN (minimum value of X-axis): 0 to 199.9999800 sec.
• X SPAN (maximum value of X-axis): Can be selected from 20, 40, 100, 200, 400 

µ

s, 1, 2, 4, 10, 20,

40, 100, 200, 400 ms, 1, 2, 4, 10, 20, 40, 100 and 200 sec.

• Y CENTER (center value of Y-axis)

• Period, time interval and pulse width measurements: 10 ns to 99.9999900 ms
• Phase difference measurement: 15.00 to 345.00 deg
• Duty ratio measurement: 0.500 to 99.500%

• Y SPAN (span of Y-axis)

• Period, time interval and pulse width measurements: Can be selected from 2, 4, 10, 20, 40, 100, 200,

400 ns, 1, 2, 4, 10, 20, 40, 100, 200, 400 

µ

s, 1, 2, 4, 10, 20, 40 and 100 ms.

• Phase difference measurement: Can be selected from 30, 60, 90, 180 and 360 deg.
• Duty ratio measurement: Can be selected from 1, 5, 10, 50 and 100%.

• Readout: Markers can be used to read measured values present in the area enclosed by the two markers.
• Display parameters: Grid and interpolation displays can be turned ON and OFF.
• X-axis resolution (time stamp mode): 100 ns

List display (time stamp mode)

A list of time stamps and their measured values is displayed.
• Displayed data can be scrolled up and down.
• Resolution for time stamps: 100 ns

List display (hardware histogram mode)

A list of measured values (class values of histogram) and their frequency is displayed.
Displayed data can be scrolled up and down.

Statistics display (time stamp mode)

A list of statistic values for the area specified for histogram display calculation setting is displayed.
Statistical computation items *: Maximum value, minimum value, mean value, standard deviation, peak to
peak, flutter

Statistics display (hardware histogram mode)

A list of statistic values for the area specified for histogram display calculation setting is displayed.
• Statistical computation items *: Maximum value, minimum value, mean value, standard deviation, peak

to peak, flutter, jitter 1, jitter 2

• Standard deviation is displayed in bar graph.

Bar graph range: Can be selected from 7.5, 15, 30 and 60 ns.

*: Statistic values in the case of 

 selected as the polarity for pulse width measurement with , and 

 selected as the polarity for

the calculation menu.
• Maximum, minimum, average, peak to peak, flutter, jitter 2: Not computed.
• Standard deviation, jitter 1: Standard deviation and jitter 1 are computed, individually for positive and negative sides, then the sum

of computed standard deviation and that of computed jitter 1 are divided by 2.

12.4 Display

Содержание TA320

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды