IM 701240-02E
Saving the Screen Image Data to the Storage Medium
Section 13.12, "Saving Screen Image Data" in the user's manual
The image data of the screen is saved to the storage medium. The media drive icon at the upper left of the screen blinks
while the data is being saved.
1
Press
MENU
.
8
Press
IMAGE SAVE
.
2
Press the
IMAGE
soft key.
3
Display the selection menu and select the
output format.
4
Display the selection menu and select the
color.
(when a setting other than PostScript is
selected in step 3)
5
Display a list of files.
6
Turn the
jog shuttle
to select the save
destination medium.
7
Press key to confirm.
Drive name of the storage medium
The file name is not set in this operation
guide. By default, the data is saved with a file
name consisting of a four-digit sequence
number starting from 0000 and extension.
You can save the screen image data by simply carrying out step 8 skipping steps
1 to 7. By default, the image is saved using the following conditions.
• Output format:
PNG (extension)
• Color:
OFF
• Comment:
(Blank)
• Save destination medium: [HD-0] (internal hard disk)
• File name:
File name consisting of a four-digit sequence
number starting from 0000 and extension.
IMAGE
SAVE
MENU
SELECT
[PC_Card
]: PC card
[HD-0
]: Internal hard disk (drive name of the internal
hard disk that is displayed in the factory
default condition)
[HD-1
]: Internal hard disk (drive name that is added
when partition is set to 3 when the hard disk
is formatted)
[SCSI5
]: SCSI device with the ID number set to 5*
[SCSI5-1
]: Partition 1 of a SCSI device whose ID
number is 5*
[NetWork
]: Network drive
[USB
]: USB storage device
* When a SCSI device whose ID number is 5 is connected
Printing/Saving Waveforms
