IM 701240-02E
Main Functions of the SL1400
Snapshot
Section 8.7, "Taking Snapshots and Clearing Traces" in the user's manual
The snapshot function allows you to temporarily hold the waveform that would be cleared when the screen is updated in
update mode or the waveform that would move out of the waveform display area in roll mode. The snapshot waveform is
displayed in white, allowing for easy comparison against the updated waveform. The snapshot waveform can be saved or
printed as a screen image.
Press CLEAR TRACE to clear the snapshot waveform.
Snapshot waveform
Displayed in white.
Updated waveform
Realtime Recording to the Internal Hard Disk (/C8 Option)
Section 7.5, "Realtime Recording to the Internal Hard Disk (Option)" in the user's manual
Measured data can be saved in realtime over long periods to the internal hard disk (/C8 option). You can set the size of the
realtime recording area in the range of 30% to 70% of the entire capacity of the internal hard disk. The stored data can be
downloaded on a PC for management and analysis.
Input signal
Copy
Acquisition
memory
Measurements other than
realtime recording
(normal measurement)
Realtime recording
Load waveform data
Save/load waveform data
PC
Realtime recording
area
(30 to 70% of
the total capacity)
Data storage area
Copy
SCSI
GP-IB interface
Ethernet interface
USB interface
Internal hard disk
Ethernet Communications
Chapter 15, "Ethernet Interface (Option)" in the user's manual
You can use the Ethernet function (/C10 option) to transfer data and control the SL1400.
Save/Load data on a network drive
As with the built-in storage medium, external SCSI devices, and USB storage devices, waveform and setup data
can be saved and loaded and screen image data can be saved to an FTP server* on the network.
* PC or workstation on which the FTP server function is running.
Print on a network printer
The screen image can be printed on a network printer in the same way as the built-in printer or USB printer.
Mail transmission
SL1400 information can be sent periodically by e-mail. You can also transmit information such as the trigger time in
an e-mail message as an action for action-on-trigger.
Access the SL1400 from a PC or workstation
You can access the SL1400 from an FTP client* on the network and retrieve files on the built-in storage medium of
the SL1400, external SCSI device, or USB storage device.
* PC or workstation on which the FTP client function is running.
Web server
The SL1400 can run as a Web server. By using the Web page of the SL1400, you can transfer files, monitor
displayed waveforms, perform basic SL1400 key control, and retrieve waveform data.
