IM 701240-02E
Assigning CH1 to the X-Axis and CH2 to the Y-Axis
Section 9.6, "Recording X-Y Waveforms" in the user's manual
Set the X-Y waveform to be displayed and recorded. Here, we assign CH1 to the X-axis and CH2 to the Y-axis.
4
Turn the
jog shuttle
to move the cursor to
“OFF ON” at row XY1 and column Display.
The cursor position is highlighted.
5
Press to turn it ON.
By default, it is turned ON.
1
Press
MENU
.
2
Press the
RECORD COND
soft
key.
3
Press the
Print Setup
soft key.
6
Turn the
jog shuttle
to move the cursor to CH1
at row XY1 and column X Trace.
7
Press .
The target waveform selection menu appears.
8
Turn the
jog shuttle
to move the cursor to CH1.
9
Press key to confirm.
By default, it is set to CH1.
10
Likewise, set the Y-axis target waveform.
By default, it is set to CH2.
11
Press
ESC
to close the target waveform
selection menu.
MENU
SELECT
SELECT
SELECT
Recording X-Y (Amplitude-Amplitude) Waveforms
