IM 701240-02E
Recording T-Y (Time-Amplitude) Waveforms
4
Press the
Initialize
soft key.
Initialization is executed.
Press here to set the SL1400 back to
the condition that existed immediately
before the initialization.
Note
• When you initialize, the display of all channels in which modules are installed is turned ON in the stopped condition.
• The items that cannot be initialized using the Initialize soft key are as follows:
Settings such as the date/time, recorder mode, language, communication parameters, and SCSI ID.
• To initialize all settings except the date/time, carry out the procedure below. You cannot restore the settings. The stored setup data
is also initialized (see section 13.1 in the user’s manual).
[Turn ON the power switch while holding down the RESET key]
Displaying/Recording only CH1
Section 5.19, "Entering Settings on the All Channel Menu" in the user's manual
Use the all channel menu* to set only CH1 to be displayed and recorded.
* A menu that is convenient for setting all channels and checking the settings.
1
Press
ALL CH
.
2
Turn the
jog shuttle
to move the cursor to ON
at row All and column Display.
The cursor position is highlighted.
3
Press to turn it OFF.
The display of all channels is turned OFF.
4
Turn the
jog shuttle
to move the cursor to
OFF at row CH1 and column Display.
5
Press to turn it ON.
Only the display of CH1 is turned ON.
ALL CH
SELECT
SELECT
