IM 701240-02E
Changing the Voltage Range from 5.00 V to 2.00 V
Section 5.3, "Setting the Voltage Range" in the user's manual
1
Turn the
RANGE
knob clockwise to set the voltage range to 2.00 V.
Because the voltage range has been decreased (vertical sensitivity
has been increased), a portion of the waveform goes off the screen.
Voltage range setting of
CH1
RANGE
Note
If you want to change the voltage range
(measurement range) of a channel other than CH1,
press , select the desired channel on the
channel selection menu, and turn the RANGE knob.
This screen is displaying the range between
1.000 V and –1.000 V around the ground level.
Ground level mark
Upper limit 1.000 V
Lower limit –1.000 V
Lower the Vertical Position to View the Entire Waveform Amplitude
Section 5.4, "Setting the Vertical Position of the Waveform" in the user's manual
1
Press
CH
.
2
Press the
CH1
soft key.
3
Check that
Variable
is OFF.
The entire amplitude of the waveform can now be seen.
4
Press the
Position
soft key.
5
Turn the
jog shuttle
or
POSITION
knob
counterclockwise to set the position to
–2.000 div.
This screen is displaying the range between
1.400 V and –0.600 V around the ground
level.
The vertical position mark and ground level
mark move together.
Upper limit 1.400 V
Lower limit –0.600 V
CH
1
Observing Waveforms