< 5. Ladder Program Training >
5-33
TI 34M6A82-01E
2nd Edition : Nov. 1, 2002-00
Setting Operation Control
The operation method can be set.
Figure Screen for Setting Operation Control
Table
Input Items for Setting Operation Control
Setting Item
Setting Method
Comments
Error-Time Action
Click on the [Run] or [Stop] radio
buttons.
Program Execution Mode
Click on the [All Blocks] or
[Specified Blocks] radio button.
Scan Monitoring Time
Set the time using keyboard input.
Momentary Power Failure
Detection Mode
Click on the [Standard] or
[Immediate] radio button.
Constant Scan
Click on the [Use] or [Do Not Use]
radio button, and if [Use] is
clicked, enter the time from the
keyboard.
Peripheral Management Time
Click on the [Not Setup] or [Setup]
radio button, and if [Setup] is
clicked, enter the time from the
keyboard.
