< 5. Ladder Program Training >
5-22
TI 34M6A82-01E
2nd Edition : Nov. 1, 2002-00
5.3.2 Defining Program Components
1. Select [Project]–[Define Program Components].
2. Delete DEMO1 in block number 1, and register (select) DEMO2.
3. Set [Configuration] to [Setup], and click [OK].
(You must select [Setup] when using local devices.)
5.3.3 Setting a Starting Number for Local Devices
1. Select [Project]–[Configuration] to open the [Configuration] dialog box.
2. Click the [Power Failure/Local] tab.
3. Set a starting number for each local device type.
The [Number of Devices Currently Registered] column displays the total number of
local devices used in all blocks in the project. Taking this into consideration, set a
starting number so that all allocated local device numbers fall within the device
range.
As only one local device is registered each for timer and counter in this exercise, the
upper limit for the [Available Setup Range] is equal to the starting number as shown
above.
4. Click [OK].
5. Select [Project]–[Check Program].
Confirm that the message "No program error or warning" is displayed.
6. Select [Project]–[Convert Data]–[Tag Name Format] and click [OK].
7. Close and reopen the Edit Block DEMO2 window. Devices are now displayed as
tag names.
