| Getting Started |
37
Querying the DHCP Server
The system is capable of querying a DHCP (Dynamic Host Configuration Protocol) server. After establishing network
connectivity, the system can obtain the following network parameters from the DHCP server during initialization:
• IP Address
• Subnet Mask
• Default Gateway
• Primary DNS (Domain Name Server)
• Secondary DNS
By default, the system obtains these parameters from a DHCPv4. If the DHCP server does not supply some of the
above parameters, you can configure them manually.
Running the Setup Wizard
The setup wizard appears on the monitor when you initialize the system for the first time or when you reset the
system to factory.
Tip:
You can run the setup via your remote control or CTP20.
You can also tap
Exit Boot Wizard
on your CP960 conference phone to skip the setup wizard.
You can configure the following features according to the setup wizard.
Menu
Description
Language
Set the language displayed on the CP960 conference phone/CTP20/the
monitor. The default language is Simplified Chinese.
Date & Time
The system obtains the time and date from the NTP server automatically by
default. You can also configure the time and date manually.
Site Name
Edit the site name.
Password
The default administrator password is “0000”. For security reasons, you
should change it as soon as possible. The new password must be at least six
characters, preferably mixing with digits and letters.
Firewall Port Mapping
Displays the firewall port mapping information.
Wired Network
Your system can obtain the network settings from a Dynamic Host
Configuration Protocol (DHCP) server. You can also configure network
settings manually.
Wi-Fi
(Only applicable to VC200/
VP59)
Connects to Wi-Fi.
Account
Optional: Log into the video conferencing platform.
Your system supports Yealink VC Cloud/Yealink Meeting Server/StarLeaf/
Zoom/Pexip/BlueJeans/EasyMeet/Custom platform.
