manualshive.com logo in svg

YASKAWA VS-606V7 Series, Инструкция по эксплуатации, Страница: 223 / 223

Поделиться
Скачать
YASKAWA VS-606V7 Series Скачать руководство пользователя страница 223

YASKAWA ELECTRIC CORPORATION

In the event that the end user of this product is to be the military and said product is to be 
employed in any weapons systems or the manufacture thereof, the export will fall under 
the relevant regulations as stipulated in the Foreign Exchange and Foreign Trade 
Regulations.  Therefore, be sure to follow all procedures and submit all relevant 
documentation according to any and all rules, regulations and laws that may apply.

Specifications are subject to change without notice 
for ongoing product modifications and improvements.

©

 1999-2005 YASKAWA ELECTRIC CORPORATION. All rights reserved.

IRUMA BUSINESS CENTER (SOLUTION CENTER)

480, Kamifujisawa, Iruma, Saitama 358-8555, Japan
Phone  81-4-2962-5696   Fax  81-4-2962-6138 

YASKAWA ELECTRIC AMERICA, INC.

2121 Norman Drive South, Waukegan, IL 60085, U.S.A.
Phone  1-847-887-7000   Fax  1-847-887-7370

YASKAWA ELETRICO DO BRASIL COMERCIO LTD.A.

Avenida Fagundes Filho, 620  Bairro Saude-Sao Paulo-SP, Brazil    CEP: 04304-000
Phone  55-11-5071-2552   Fax  55-11-5581-8795

YASKAWA ELECTRIC EUROPE GmbH

Am Kronberger Hang 2, 65824 Schwalbach, Germany
Phone  49-6196-569-300     Fax  49-6196-569-312

YASKAWA ELECTRIC UK LTD.

1 Hunt Hill Orchardton Woods Cumbernauld, G68 9LF,  United  Kingdom
Phone  44-1236-735000   Fax  44-1236-458182

YASKAWA ELECTRIC KOREA CORPORATION

7F, Doore Bldg. 24, Yeoido-dong, Youngdungpo-Ku, Seoul 150-877, Korea
Phone  82-2-784-7844   Fax  82-2-784-8495

YASKAWA ELECTRIC (SINGAPORE) PTE. LTD.

151 Lorong Chuan, #04-01, New Tech Park 556741, Singapore
Phone  65-6282-3003  Fax  65-6289-3003

YASKAWA ELECTRIC (SHANGHAI) CO., LTD.

No.18 Xizang Zhong Road. Room 1702-1707, Harbour Ring Plaza Shanghai 200001, China
Phone  86-21-5385-2200   Fax  86-21-5385-3299

YASKAWA ELECTRIC (SHANGHAI) CO., LTD. BEIJING OFFICE

Room 1011A, Tower W3 Oriental Plaza, No.1 East Chang An Ave.,
Dong Cheng District, Beijing 100738, China
Phone  86-10-8518-4086   Fax 86-10-8518-4082

YASKAWA ELECTRIC TAIWAN CORPORATION

9F, 16, Nanking E. Rd., Sec. 3, Taipei, Taiwan
Phone  886-2-2502-5003   Fax  886-2-2505-1280 

YASKAWA

VS-606V7 Series

INSTRUCTION MANUAL

Safety

Precautions

 
 
・
 
 
 
 
・
 
 
 
 
・
・

This Inverter is for variable-speed applications with three-phase AC motors for general 
industrial use. 

This Inverter was not designed or manufactured for use in devices or systems that 
may directly affect or threaten human lives or health. Customers who intend to use 
the product described in this manual for devices or systems relating to transportation, 
health care, space aviation, atomic or electric power, or underwater use must contact 
their Yaskawa representatives or the nearest Yaskawa sales office beforehand.
This product has been manufactured under strict quality-control guidelines. However, 
if this product is to be installed in any location where failure of this product could 
involve or result in a life-and-death situation or loss of human life or in a facility where 
failure may cause a serious accident or physical injury, safety devices must be 
installed to minimize the likelihood of any accident.
Wiring must be performed by an authorized person qualified in electrical work.
Do not use this product with any load other than a three-phase AC motor.

Printed in Japan  July 2005  99-6

MANUAL NO.  TOE-S606-11.2H

05-7

⑦ 

15

Содержание VS-606V7 Series
































































































































































































































Отзывы:

Нет отзывов