YASKAWA SLIO Скачать руководство пользователя страница 74

Страница: 74 / 116

4.5.6.1.4 Not configured modules are added to the existing modules when the bus connection is active

If one or more modules, which are not configured, are added to the existing modules

during an active bus connection, the IM 053-1EC01 behaves as follows:

The IM 053-1EC01 changes to the

PreOp

state.

The System SLIO backplane bus is refreshed.

In the state

PreOp

The SF LED blinks.

The RUN LED blinks.

4.5.6.1.5 Modules are added or removed when the bus plug is removed

If modules are added or removed, when the bus plug is removed, the IM 053-1EC01

behaves as follows:

The modification is detected automatically and the configuration is refreshed.

The SF LED remains off.

The RUN LED remains unchanged.

4.5.7 Access to module information

Index:Sub

Name

Type

Offset

Access Default

Description

0x4100:00

Module Informa-

tion

Module Identity Information IM 053EC

0x4100:01

Module Name

VSTRG

Module Name

0x4100:02

Module ID

U32

256

Module ID

0x4100:03

Serial Number

VSTRG

288

Serial number of the module

0x4100:04

Product Version

VSTRG

448

Product version of the module

0x4100:05

Hardware Version

VSTRG

520

Hardware version of the module

0x4100:06

Software Version

VSTRG

536

Software version of the module

0x4100:07

FPGA Version

U16

632

FPGA version

0x4100:08

Mx File

VSTRG

648

Mx file of the coupler

‘Explanation of the elements’ page 82

When accessing the module information of IM 053EC the corresponding module is

addressed via the index ( EtherCAT-Slot). Subindexes give you access to the

corresponding module information.

Please note that in operation mode Enhanced Mode the index of the

module-related objects is to be incremented accordingly.

The index is calculated as follows:

Index

Enhanced

= Index + (16



EtherCAT-Slot)

Chap. 4.3 ‘Operating Mode - Normal/Enhanced mode’ page 58

Module information

System SLIO

Deployment

Accessing the System SLIO > Access to module information

HB300 | IM | 053-1EC01 | en | 22-30

Содержание SLIO





















































































































Результаты поиска

Содержание SLIO

Отзывы:

YASKAWA SLIO, Руководство пользователя, Страница: 74 / 116

Результаты поиска

Содержание SLIO

Отзывы: