YASKAWA SLIO Скачать руководство пользователя страница 6

Страница: 6 / 116

Contact your local representative of YASKAWA Europe GmbH if you encounter problems

or have questions regarding the product. If such a location is not available, you can reach

the Yaskawa customer service via the following contact:

YASKAWA Europe GmbH,

European Headquarters, Hauptstraße 185, 65760 Eschborn, Germany

Tel.: +49 6196 569 500 (hotline)

Email: [email protected]

1.2 About this manual

This manual describes the IM 053EC of the System SLIO.

It describes the structure, configuration and application.

The manual is targeted at users who have a background in automation technology.

The manual consists of chapters. Each chapter describes a completed topic.

For guidance, the manual provides:
–

An overall table of contents at the beginning of the manual.

–

References with pages numbers.

Validity of the documentation

Product

Order no.

as of state:

IM 053EC

053-1EC01

HW: 01

FW: V2.0.0

Important passages in the text are highlighted by following icons and headings:

DANGER!

Immediate or likely danger. Personal injury is possible.

CAUTION!

Damages to property is likely if these warnings are not heeded.

Supplementary information and useful tips.

Technical support

Objective and contents

Icons Headings

System SLIO

General

About this manual

HB300 | IM | 053-1EC01 | en | 22-30

Содержание SLIO





















































































































Результаты поиска

Содержание SLIO

Отзывы:

YASKAWA SLIO, Руководство пользователя, Страница: 6 / 116

Результаты поиска

Содержание SLIO

Отзывы: