Yamatake SDC35, Руководство пользователя

Страница: 36 / 280

• When pressing the [<] key with the [para] key kept pressed instead of
pressing of the [para] key on the setting display, various displays and
settings can be operated in the reverse order. However, the
operation that both the [para] key and [<] key are kept pressed for 2s
or longer, is invalid.
• When pressing the [<] key with the [display] key kept pressed instead
of pressing the [display] key in the operation display mode, various
displays and setting displays can be operated in the reverse order.
■
Data setting procedures
Two types of data setting procedures are provided, standard type and special type.
A desired type can be selected using the setup bank [C71: Key operation
mode/type].
Standard type: The [enter] key is used to start changing the setup value and to
set the value currently being changed.
Special type: The [<] , [ ] , or [ ] key is used to start changing the setup
value. To set the value currently being changed, wait for 2s
without pressing of any key. (However, only the standard type
operation can be performed in the bank setup display mode.)
●
Standard type
(1) Operate the [display] , [para] , [<] , [ ] , or [ ] key to display desired data to be
set.
(How to display the data is explained in "General flow of key operation"
described previously.)
(2) Press the [enter] key.
>> When the lower display shows a numeric value, the 1st digit starts flashing.
Additionally, when the lower display shows a character string, the entire
character string starts flashing.
When a numeric value is displayed, the value can be increased or decreased
or the flashing digit can be moved using the
[<] , [ ] , or [ ] key.
When a character string is displayed, the entire flashing character string can
be changed using the
[ ] , or [ ] key.
<
<
<
<
<
<
<
<
2-4
Chapter 2. OUTLINE OF FUNCTIONS
Type setup Setup bank Setup bank
Display mode C71 = 0 C71 = 1
Operation display Standard type Special type
Bank setup display Standard type Standard type
User function setup display Standard type Special type
pv
sp
pv
sp
(This Figure shows the display
when setting the PV range type of
the setup setting [C01].) (This Figure shows the display
when setting the RUN/Ready
selection in the parameter setting
[r--r].)