Yamatake SDC35, Руководство пользователя

Страница: 190 / 280

6-18
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
Display Item
Contents
Initial
value User
level Remarks
Multi Status (MS)
display, Condition
(second priority) Same as Multi Status (MS) display,
Condition (top priority) 44 2
Multi Status (MS)
display, Status
(second priority) Same as Multi Status (MS) display,
Status (top priority) 6 2
Multi Status (MS)
display, Condition
(third priority) Same as Multi Status (MS) display,
Condition (top priority) 1 2
Multi Status (MS)
display, Status (third
priority) Same as Multi Status (MS) display,
Status (top priority) 9 2
Multi Status (MS)
display, deviation
range 0 to 9999U 5 2
Special function 0 to 15
(This value becomes “0” when the
power is turned ON.) 0 2
Zener barrier
adjustment The value can be changed with the
adjustment.
The numeric value cannot be directly
input with the manual operation. 0.00 2 Displayed when the PV
range type is RTD and the
special function (C88) is set
at “5”.
Multi Status (MS)
display, Status (top
priority) 0: Lit.
1: Slow flashing
2: Flashing twice
3: Fast flashing
4: Left to right
5: Right to left
6: Reciprocating between left and
right
7: Deviation OK
8: Deviation graph
9: MV graph
10: Heat-side MV graph (For
heat/cool control)
11: Cool-side MV graph (For
heat/cool control)
12: MFB graph (including MFB being
estimated)
13: DI monitor
14: Internal contact monitor
15: Internal event monitor
1 2
Number of CT2 power
wire loops 0: 1 time
1 to 6: Number of times 1 2
Number of CT2 turns 0: 800 turns
1 to 40: CT turns devided by 100. 8 2