Yamatake SDC35, Руководство пользователя

Страница: 144 / 280

5-86
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
■
Output scaling low limit/high limit
The output scaling low limit and high limit of the current output and continuous
voltage output can be set.
• When the object control output is the current output or continuous voltage
output, the display and setting can be configured.
• The following figures show the relationship between the numeric value and
output of the output type using the output scaling low limit/high limit settings:
However, the output is 0 to 110% in a range of 0 to 20mA.
Item (Bank) Display Contents Initial value User level
Control output 1 scaling low
limit (Setup bank)
-1999 to +9999
The decimal point position may vary so that it
meets the output type.
The unit depend on the output type are as
follows:
•When the output type is 0 to 2, % of
manipulated variable
•When the output type is 3 to 6, same as
PV(˚C etc.)
•When the output type is 7 and 8,
ampere(current value)
•When the output type is 9, % of MFB
0.0 Basic,
Standard,
High function
Control output 1 scaling high
limit (Setup bank)
100.0
Control output 2 scaling low
limit (Setup bank)
0
Control output 2 scaling high
limit (Setup bank)
1000
Output (%) Output (%)
-10
0
100
110
-10
0
100
110
Input (%)
Low limit Low limit
Low limit < High limit Low limit > High limit
High limit High limit
Input (%)
Auxiliary output scaling low
limit (Setup bank)
0
Auxiliary output scaling high
limit (Setup bank)
1000