Yamatake SDC35, Руководство пользователя

Страница: 116 / 280

5-58
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
Operation type Set value Direct action Reverse action
of operation
type
SP high limit 10
SP low limit 11
SP high/low limit 12
MV high limit 13
MV low limit 14
MV high/low limit 15
Heater 1 burnout/ 16
Over-current(*2)
Heater 1 17
short-circuit(*2)
Heater 2 burnout/ 18
Over-current(*2)
Heater 2 19
short-circuit(*2)
Main setting
SP
Main setting
SP
ON HYS
ON
HYS
Main setting (*1) Sub-setting (*1) Main setting (*1)Sub-setting (*1)
SP SP
ON HYS
ON HYS ON HYS HYS
ON HYS
ON HYS
Main setting Main setting
MV MV
Main setting
MV
Main setting
MV
ON HYS
ON HYS
Main setting (*1) Sub-setting (*1)
MV
ON HYS
ON HYS ON HYS HYS
Main setting (*1) Sub-setting (*1)
MV
Main setting (*1) Sub-setting (*1)
CT1 at output ON. CT1 at output ON.
ON
HYS
ON HYS ON HYS HYS
Main setting (*1) Sub-setting (*1)
OFF before measuring the CT1 current value OFF before measuring the CT1 current value
ON HYS
ON
HYS
Main setting Main setting
CT1 at output OFF. CT1 at output OFF.
OFF before measuring the CT1 current value OFF before measuring the CT1 current value
Main setting (*1) Sub-setting (*1)
CT2 at output ON. CT2 at output ON.
ON HYS
ON HYS ON HYS
HYS
Main setting (*1) Sub-setting (*1)
OFF before measuring the CT2 current value OFF before measuring the CT2 current value
ON HYS ON HYS
Main setting Main setting
CT2 at output OFF. CT2 at output OFF.
OFF before measuring the CT2 current value OFF before measuring the CT2 current value
●
shows that the ON/OFF is changed at this value.
❍
shows that the ON/OFF is changed at a point that
"1U" is added to this value.
●
shows that the ON/OFF is changed at this value.
❍
shows that the ON/OFF is changed at a point that
"1U" is added to this value.
ON HYS
ON HYS
Main setting
Main setting
SP SP