Yamaha WR250FR 2002, Руководство по эксплуатации для владельца

Страница: 266 / 343

5 - 39
CHAS
FRONT FORK
4. Tighten:
• Pinch bolt (upper bracket)
1
• Pinch bolt (lower bracket)
2
CAUTION:
Tighten the lower bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
5. Install:
• Brake hose holder
1
• Brake caliper
2
• Bolt (brake caliper)
3
NOTE:
Fit the brake hose holder cut
a
over the pro-
jection
b
on the front fork and clamp the brake
hose.
6. Install:
• Brake hose holder
1
• Bolt (brake hose holder)
2
• Protector
3
• Bolt (protector)
4
NOTE:
When installing the brake hose holder, align
the top
a
of the brake hose neck with the
brake hose holder bottom
b
. Then pass the
brake hose
5
in front of the axle boss
c
and
fit it into the hose groove
d
so that the brake
hose does not contact the nut (wheel axle).
T
R .
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R
.
.
20 Nm (2.0 m · kg, 14 ft · lb)
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
7. Adjust:
• Rebound damping force
NOTE:
Turn in the damping adjuster
1
finger-tight
and then turn out to the originally set position.
www.PlanDeGraissage.org