Yamaha RCX141, Руководство пользователя

Страница: 149 / 402

4-
91
4
Operation
11. “MANUAL” mode
11.2.8.4 Copying a point comment
Point comments can be copied under another point number.
[Procedure]
1) Press the
F 6
(COPY) key in “MANUAL>POINT>COMMENT” mode.
The message “Copy(####-####,####)>“ appears on the guideline.
2) Use the
0
to
9
,
–
and
,
keys to enter the point number range
for the copy source and the point number for the copy destination in the following
format, and press the key.
“(copy start number) – (copy end number), (copy destination number)”
For example, to copy the point comments between P7 and P16 onto the lines after
P107, enter “7 - 16, 107” and press the key.
Fig. 4-11-31
MANUAL >POINT>COMMENT 50%[MG][S0H0X]
————————————x———————y———————z———————r———
P7 = 100.00 250.00 15.00 30.00
P8 =
P9 = 122.62 -24.54 12.35 -23.11
COMNT: [ ]
[POS] 50.00 100.00 5.00 10.00
Copy(####-####,####)>7-16,107_
3) A confirmation message appears on the guideline.
Press the
F 4
(YES) key to make a copy. The comments in the selected range are
copied onto the data lines starting from the specified copy destination number.
Press the
F 5
(NO) if you want to cancel the copy.
Fig. 4-11-32
MANUAL >POINT>COMMENT 50%[MG][S0H0X]
————————————x———————y———————z———————r———
P7 = 100.00 250.00 15.00 30.00
P8 =
P9 = 122.62 -24.54 12.35 -23.11
COMNT: [ ]
[POS] 50.00 100.00 5.00 10.00
(7-16,107)Copy OK? YES NO
n
NOTE
Valid point numbers are from 0 to
9999.