Yamaha RCX141, Руководство пользователя

Страница: 144 / 402

4-
86
Operation
4
11. “MANUAL” mode
2) Use the
0
to
9
,
–
and
,
keys to enter the point number range
for the copy source and the point number for the copy destination in the following
format and press the key.
“(copy start number) – (copy end number), (copy destination number)”
For example, to copy the data between P30 and P34 onto the lines after P50, enter
“30 - 34, 50” and press the key.
A confirmation message appears on the guideline.
Fig. 4-11-24 Copying point data (2)
MANUAL >POINT 50% [MG][S0H0X]
————————————x———————y———————z———————r———
P30 = 100.00 250.00 15.00 30.00
P31 = 50.00 100.00 5.00 10.00
P32 = 122.62 -24.54 12.35 -23.11
[POS] 50.00 100.00 5.00 10.00
(30-34,50)Copy OK? YES NO
COMNT: [ ]
3) Press the
F 4
(YES) key to make a copy.
The point data in the selected range is copied onto the data lines starting from the
specified copy destination number.
Press the
F 5
(NO) if you want to cancel the copy.
11.2.6 Erasing point data
[Procedure]
1) Press the
F 7
(ERASE) key in “MANUAL>POINT” mode.
The message “Erase (####-####)>” appears on the guideline.
Fig. 4-11-25 Erasing point data (1)
MANUAL >POINT 50% [MG][S0H0X]
————————————x———————y———————z———————r———
P30 = 100.00 250.00 15.00 30.00
P31 = 50.00 100.00 5.00 10.00
P32 = 122.62 -24.54 12.35 -23.11
[POS] 50.00 100.00 5.00 10.00
Erase(####-####)>
COMNT: [ ]
n
NOTE
Valid point numbers are from 0 to
9999.