Yamaha Electone F-25, Руководство пользователя

Страница: 73 / 122

Operation
67
To raise the bow (trim-out), press the switch
“
” (up).
To lower the bow (trim-in), press the switch
“
” (down).
Make test runs with the trim set to different
angles to find the position that works best for
your boat and operating conditions.
EMU27893
Adjusting trim angle for hydro tilt
models
WARNING
EWM00492

Stop the engine before adjusting the
trim angle.

Be sure all people are clear of the out-
board motor when adjusting the trim
angle, also be careful not to pinch any
body parts between the drive unit and
clamp bracket.

Use caution when trying a trim position
for the first time. Increase speed gradu-
ally and watch for any signs of instabil-
ity or control problems. Improper trim
angle can cause loss of control.
1. Stop the engine.
2. Place the tilt lock lever in the release po-
sition.
3. Hold the rear of the top cowling with one
hand and tilt the engine to the desired
angle.
4. Place the tilt lock lever back into the lock
position to support the engine.
To raise the bow (“trim-out”), tilt the engine
up.
To lower the bow (“trim-in”), tilt the engine
down.
Make test runs with the trim set to different
angles to find the position that works best for
your boat and operating conditions.
EMU27913
Adjusting boat trim
When the boat is on plane, a bow-up attitude
results in less drag, greater stability and effi-
ciency. This is generally when the keel line of
the boat is up about 3 to 5 degrees. With the
bow up, the boat may have a greater tenden-
cy to steer to one side or the other. Compen-
sate for this as you steer. When the bow of
the boat is down, it is easier to accelerate
from a standing start onto plane.
1. Power trim and tilt switch
ZMU07537
6BP-9-3B-1E0.book 67 ページ ２０１５年１１月１６日 月曜日 午後５時５７分