Yamaha EDL20000TE, Руководство пользователя

Страница: 36 / 140

– 27 –
STOP
ON
GLOW LAMP
START
763-185
q
w
e
r
STOP
ON
GLOW LAMP
START
763-185a
e
MAIN SWITCH
The main switch has the following
functions.
1 5
“STOP”
Electric circuit is switched off. The
engine will not run.
2 7
“ON”
Electric circuit is switched on.
NOTE:
The charge warning light and oil
warning light will turn on. This al-
lows the operator to verify if all
lights are working.
3
“GLOW LAMP”
Preheating circuit is switched on.
The glow plug is heated in order to
start the engine. The glow light
turns on, and turns off after about
5 seconds.
4
“START”
Starting circuit is switched on. The
starter motor cranks the engine to
start it.
c C
Release the switch immediately
after the engine starts.
主开关
主开关有下述控制功能。
1 5
“STOP”
关闭电路开关。发动机将无法运
转。
2 7 “ON”
打开电路开关。
注意：
充电警告灯和油量警告灯会点
亮。这样，操作人员可以确认所有操
作灯是否都正常。
3
===
“GLOW LAMP”
打开预热回路。辉光塞会被加热
以启动发动机。辉光灯会点亮，并在
约 5 秒钟后熄灭。
4
===
“START”
打开启动回路。启动马达会驱动
发动机并将其启动。
告诫：
发动机启动后，应立即松开开关。
9C1-9-N2̲001-030
07.1.25, 10:42 Page 27
Adobe PageMaker 6.5J/PPC