Yamaha CS1D, Руководство пользователя

Страница: 430 / 617

OUT COMP (output compressor) function
95
OUT PATCH
OUT INSERT
OUT EQ
OUT COMP
OUT DELAY
OUT DCA/MUTE
MATRIX/ST
OUT CH VIEW
A RELEASE (release time)
Specify the time from when the key-in signal drops
below the threshold until compression is defeated.
B GAIN
Set the output level gain.
C KNEE
This sets the sharpness of the angle at which the out-
put level will change. A setting of HARD produces
the sharpest angle, and a setting of SOFT5 produces
the softest angle.
D OUTPUT COMP LIBRARY (output compressor
library)
This button accesses the COMP LIBRARY window
allowing you to store/recall compressor settings
(
→
p.184).
E LINK ON/OFF (key-in link)
This specify whether the key-in signals will link com-
pressor operation for adjacent odd-numbered
→
even-numbered channels (link=on), or whether the
compressors will operate with independent key-in
signals (link=off).
•
Key-in signal flow when link=on
•
Key-in signal flow when link=off
•
Be careful not to confuse “compressor link” with
“stereo pairing of output channels.” Turning on com-
pressor link simply causes the compressors to be
linked by the key-in signal; the compressor parame-
ters themselves can be set independently for each
channel.
•
When output channels are used as a stereo pair, com-
pressor link will automatically be turned on, and the
compressor parameter values will also be linked.
However you are free to subsequently turn linking
off and modify the parameter values.
F SELECT (Key-in select)
Select the key-in signal from the following choices.
•
SELF PRE EQ
The immediately before EQ signal of the currently
selected output channel
•
SELF POST EQ
The immediately before compressor signal of the
currently selected output channel
•
LEFT CH
The signal of the previously-numbered output chan-
nel (the same signal as the SELF POST EQ of the pre-
vious channel)
If you select LEFT CH, the post- INPUT FILTER
signal of the previously-numbered channel will be
the key-in signal. However, please be aware that the
INPUT FILTER will not function unless COMP is
on.
•
KEY IN1–KEY IN4
Signal of the input channel selected in the respective
CH SELECT menu
If MIX channel 1, MATRIX channel 1, or the STE-
REO A or B channel is selected, the LEFT CH but-
ton will not be displayed.
Nor will it be displayed for paired channels.
D
E
F
ATTACK
processing
GR
THR
THR
LINK = ON
ATTACK
processing
GR
Key-in signal of odd-
numbered channel
Key-in signal of even-
numbered channel
Detect the
maximum
level
ATTACK
processing
ATTACK
processing
Key-in signal of odd-
numbered channel
Key-in signal of even-
numbered channel
Detect the
maximum level
Detect the
maximum level
GR
THR
THR
LINK = OFF
GR