Yamaha CS1D, Руководство пользователя

Страница: 250 / 617

SELECTED INPUT CHANNEL block
33
DCA section
This section assigns the currently selected channel to a DCA group. It is convenient to use this section when you wish to
assign a single channel to multiple DCA groups.
1 DCA [1]–[12] switches and LEDs
These switches assign the currently selected channel
to DCA groups 1–12.
When the channel is assigned to a DCA group, the
LED of the corresponding switch will light.
[Procedure]
Using the SELECTED INPUT CHANNEL block to
assign a channel to a DCA group
1. Select the input channel or ST IN channel that you
wish to assign to a DCA group (1–12).
2. In the SELECTED INPUT CHANNEL block, use the
DCA [1]–[12] switches to select the DCA group(s)
to which you wish to assign the channel. (You may
select more than one DCA group.)
The LED(s) for the corresponding DCA group(s)
will light.
•
DCA groups 9–12 can be used for either input chan-
nels or output channels. However, it is not possible
to assign both inputs and outputs to the same DCA
group.
For this reason, if an output channel is already
assigned to DCA group 9–12, attempting to assign an
input channel will cause a message to be displayed,
and you will not be able to do so.
•
When a scene is recalled, the DCA group data of
recall safe channels may be adjusted so that recall safe
settings are consistent within DCA groups 9–12.
Also when a channel library is recalled, the data
recalled to a channel may be adjusted so that settings
are consistent within DCA groups 9–12.
12
11
10
9
8
7
6
5
4
3
2
1
DCA
1