Yamaha CS1D, Руководство пользователя

Страница: 266 / 617

MATRIX OUTPUT block
49
•
When MATRIX channels are not paired
•
When MATRIX channels are paired
7 MATRIX [INS] LED
This LED indicates the insertion on/off status for the
MATRIX channel.
When insertion is on, the LED will light, and the
insert out/in point specified in the display (OUTPUT
PATCH function INSERT PATCH screen) will be
enabled.
8 MATRIX [CUE] switch and LED
This switch monitors the currently selected MATRIX
channel.
When this switch is pressed, the PFL (pre-fader lis-
ten) or POST ON (after the [ON] switch) signal of
the corresponding MATRIX channel will be sent to
the CUE bus, and can be monitored from the CUE
OUT jacks, MONITOR OUT jacks A, or PHONES
jack.
The location of the signal that is sent to the CUE bus
and the monitoring method can be switched from
the console in the MASTER block CUE section, or in
the display (MON/CUE function CUE/SOLO
screen).
9 MATRIX [SEL] switch and LED
This switch selects the MATRIX channel that your
operations will affect. The MATRIX [SEL] LED of
the currently selected MATRIX channel will light.
The MATRIX channel selected by this switch can be
controlled in the SELECTED OUTPUT CHANNEL
block.
It will also be reflected by the settings in the display.
Hint
If the selected MATRIX channel is paired, the
MATRIX [SEL] LED of the other MATRIX channel
of the pair will blink.
You can also use the MATRIX [SEL] switches to set/
defeat pairing.
MATRIX CHANNEL
MATRIX 1
MATRIX 2
PAIR
ON ON
OUTPUT PATCH
OUTPUT LEVEL
OUTPUT LEVEL
ON
ON
MATRIX
channel 1
OUTPUT
LEVEL MATRIX
channel 2
OUTPUT
LEVEL
PAIR
ON ON
OUTPUT PATCH
OUTPUT LEVEL BALANCE
MATRIX CHANNEL
ON
MATRIX 1
MATRIX 2
MATRIX
channel 1/2
OUTPUT
LEVEL
MATRIX
channel 1/2
BALANCE