Yamaha CS1D, Руководство пользователя

Страница: 187 / 617

CS1D Operating Manual (Basic Operation)
128
Inserting an internal effect into a channel
With this method, an internal effect can be patched between the insert out and insert in of a desired channel. As an
example, we will explain how to insert an effect into an input channel.
[Procedure]
1. In the LCD FUNCTION ACCESS block, press the
[EFFECT] switch several times to access the desired
effect screen from EFFECT 1– EFFECT 8.
•
EFFECT 1 screen (EFFECT function)
2. Click the SEL button located in the INPUT L sec-
tion at the upper left of the screen.
The CH SELECT popup window will appear.
•
CH SELECT popup window
3. In the row of buttons at the top of the screen, click
either the “IN 1-48 INS. OUT” button or the “IN
49-96 INS. OUT” button {on the 48 channel model,
this button has no effect}.
The buttons labeled “INS. OUT” are used to patch
the effect input to the insert out of each channel. You
may also select a MIX channel or MATRIX channel
as the insert destination.
For channels that are already used by another chan-
nel, the NAME will be displayed in white characters
on a red background.
Please be aware that selecting one of these channels
may affect other functionality.
4. Click the button for the channel that you wish to
patch to the L input of the effect.
You will return to the previous effect screen, and the
insert out selected for the INPUT L section will be
displayed. As necessary, assign an insert out to the R
channel of the effect as well.
Hint
If one of two paired channels (or a stereo channel) is
patched to the L input of the effect, the other channel
will automatically be patched to the R input of the effect.
5. Click the SEL button located in the OUTPUT L sec-
tion at the upper right of the screen.
The CH SELECT popup window will appear, allow-
ing you to select a signal route as the effect send des-
tination.
•
CH SELECT popup window
6. In the row of buttons at the top of the screen, click
either the IN 1-48 INS. IN” button or the “IN 49-96
INS. IN” button {on the 48 channel mode, this but-
ton has no effect}.
The buttons labeled “INS. IN” are used to patch the
effect output to the insert in of each channel. Nor-
mally, you will select the insert in of the same chan-
nel that you selected in step 3.
LCD FUNCTION ACCESS
block
[EFFECT] switch