Yamaha CS1D, Руководство пользователя

Страница: 185 / 617

CS1D Operating Manual (Basic Operation)
126
The EFFECT function has eight screens for the eight
effects EFFECT 1 – EFFECT 8, allowing settings to be
made independently.
4. Click the SEL button located in the INPUT L sec-
tion at the upper left of the screen.
When you click the SEL button of the INPUT L/
INPUT R section, a CH SELECT popup window will
appear, allowing you to select the signal path that will
be patched to the input of the effect.
•
CH SELECT popup window
In this window, you will first use the buttons in the
top row to select the type of signal route, and then
use the remaining buttons to select an individual
channel. You can select from the following signal
routes.
•
CH 1 INS – CH 96 INS {CH 1 INS – CH 48 INS}
Input channel 1–96 {1–48} insert out
•
ST 1 INS–ST 8 INS {ST 1 INS–ST 4 INS} (L/R)
ST IN channel 1–8 {1–4} insert out
•
MIX 1 – MIX 48
MIX channel 1–48 output
•
STA (L/R)
STEREO A channel (L/R) output
•
STB (L/R)
STEREO B channel (L/R) output
•
MATRIX 1 – MATRIX 24
MATRIX channel 1–24 output
•
MIX 1 INS – MIX 48 INS
MIX channel 1–48 insert out
•
MATRIX 1 INS – MATRIX 24 INS
MATRIX channel 1–24 insert out
•
STA (L/R) INS
STEREO A channel (L/R) insert out
•
STB (L/R) INS
STEREO B channel (L/R) insert out
•
OFF
If you click this button, the selection will be can-
celled.
For channels that are already used by another effect,
the NAME will be displayed in white characters on
a red background.
Please be aware that selecting one of these channels
may affect other functionality.
5. From the buttons in the top row of the screen, click
the MIX button, and then click the number of the
MIX bus that you set to VARI type in step 2.
When you click the number, you will return to the
previous screen. As necessary, assign a MIX channel
to the R input of the effect as well.
Hint
If one of two paired MIX channels is patched to the L
input of the effect, the other MIX channel will auto-
matically be patched to the R input of the effect.
6. Click the SEL button located in the OUTPUT L sec-
tion at the upper right of the screen.
When you click the SEL button of the OUTPUT L/
OUTPUT R section, a CH SELECT popup window
will appear, allowing you to select the signal route
that will be patched to the effect output.
•
CH SELECT popup window
You can select from the following signal routes.
•
CH 1 – CH 96 {CH 1– CH48}
Input channel 1–96 {1–48} input
•
CH 1 INS – CH 96 INS {CH 1 INS – CH 48 INS}
Input channel 1–96 {1–48} insert in
•
ST 1 –ST8 {ST 1 – ST 4} (L/R)
ST IN channel 1–8 {1–4} input
•
ST 1 INS–ST 8 INS {ST 1 INS–ST 4 INS} (L/R)
ST IN channel 1–8 {1–4} insert in
•
MIX 1 INS – MIX 48 INS
MIX channel 1–48 insert in
•
MATRIX 1 INS – MATRIX 24 INS
MATRIX channel 1–24 insert in
•
STA (L/R) INS
STEREO A channel (L/R) insert in
•
STB (L/R) INS
STEREO B channel (L/R) insert in
•
OFF
If you click this button, the selection will be can-
celled.
For channels that are already used by another effect,
the NAME will be displayed in white characters on
a red background.
Please be aware that selecting one of these channels
may affect other functionality.