Xylem YSI Alyza IQ NH4, Руководство по эксплуатации

Страница: 98 / 170

Measurement / Operation Alyza IQ NH4
98
ba76202d02 05/2020
been started. Do not cut off the supply voltage during the update procedure!
The update may take up to 10 minutes.
Beeps indicate the status during the software update:
5 In the service menu, start the software update (component with USB
interface).
A software update does not change any measurement settings,
measurement data or calibration data.
Beeps Status Next step
Beeps
approx.
every 3 sec-
onds The software update
of the Alyza IQ is
being carried out Wait for the software update to be
completed:
Signal for the end of the update:
3 short beeps (see below)
or
3 long beeps (see below)
3 short beeps
(quickly one
after the
other) The software update
of the Alyza IQ is
completed  Remove the USB memory device.
The Alyza IQ automatically restarts.
3 long beeps
(quickly one
after the
other) The software update
was not successful  Remove the USB memory device.
The Alyza IQ automatically restarts
with the old software.
 If necessary, check the data on the
USB memory device.
 Repeat the software update