Xylem WTW Multi 3430, Руководство по эксплуатации

Страница: 110 / 134

Multi 3430
Operation
110
ba75865e19 04/2015
Note
The following rule applies: With the exception of the menus, shortly
pressing the
<PRT> key generally outputs the display contents to the
interface (displayed measured values, measuring datasets, calibration
records). If there is a USB-B connection (such as to a PC) at the same
time, the data are output only to the USB-B interface.
4.14.5 Data transmission to the USB-A interface (USB memory
device)
Via the USB-A interface, you can transmit data to a USB memory or
USB printer device. How to transmit data to a USB printer device is
described in an extra section (see section 4.14.5).
The following table shows which data are transmitted to the interface in
which way:
Current
measured values
of all connected
sensors Manual

With <PRT>

Simultaneously with every
manual storage process
(see section 4.13.1)
Automatic, at
intervals

With <PRT
_
> .
Then you can set the trans-
mission interval

Simultaneously with every
automatic storage process
(see section 4.13.2)
Stored measured
values Manual

Displayed dataset with
<PRT> after calling up from
the storage

All datasets with the Output
to RS232/USB function
(USB-B interface)

All datasets with the Output
to USB flash drive or printer
function (USB-A interface)
For details, see section 4.13.3.
calibration
records Manual

Displayed calibration record
with
<PRT>

All calibration records with
<PRT
_
>
For details, see section 4.14.
Automatic

At the end of a calibration
procedure